1. There are many ways to install the alarm, and it is very convenient to install the evacuation. When the alarm is installed on the insulated rod, ascloseas possible to the metal wire clip.
2. With non-contact induction technology, accurate alarm, alarm power consumption is very small, standby time up to 6 months.
3. All-round induction the voltage source, automatic trigger detection mode, sound and light alarm mode, to ensure the safety of personnel workingnearelectricity.
Power Supply | Lithium battery DC 7.4V 600mAh |
Alarm Voltage Range | 40V~10kV |
Work Frequency | 50Hz/60Hz |
Method of Electricity Verification | Non-contact |
Detect Mode | Automatic trigger |
Work Time | Continuous work (sound & light alarm): about 48 hours |
Standby time: 6 months | |
Alarm Method | Indicator light: constantly flashing |
Buzzer: continuously emit beep-beep-beep sound | |
Weight | Alarm: about 125g (include battery); Total Weight: 310g (include accessory) |
Overall Size | 80mm×77mm×57mm |
Protection Level | IP65 |
Working Temperature & Humidity | -10℃~40℃; below 80%RH |
Store Temperature & Humidity | -10℃~60℃; below 70%RH |
